F3125 gprs modem router gprs modem sa odgovarajucom antenom
F3125 GPRS ROUTER is a kind of cellular terminal device that provides data transmission function by public GPRS network.
It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422) and Ethernet port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial and Ethernet devices with only basic configuration.
It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
- Design for Indstrial Application
- High-powered indstrial celllar modle
- High-powered indstrial 32bits CP
- support low-consmption mode, inclding sleep mode, schedled online/offline mode, schedled power-on/power-off mode(optional)
- Hosing: iron, providing IP30 protection.
- Power range: DC 5~35V
- Stability and Reliability
- support hardware and software WDT
- support ato recovery mechanism, inclding online detect, ato redial when offline to make roter always online
- Ethernet port: 1.5KV magnetic isolation protection
- RS232/RS485/RS422 port: 15KV ESD protection
- SIM/IM port: 15KV ESD protection
- Power port: reverse-voltage and overvoltage protection
- Antenna port: lightning protection(optional)
- Standard and Convenience
- support standard RS232(or RS485/RS422), Ethernet port that can connect to serial, Ethernet devices directly
- support intellectal mode, enter into commnication state atomatically when powered
- Provide management software for remote management
- support several work modes
- Convenient configration and maintenance interface(WEB or CLI)
- support 3G/HSPA/4G WAN access methods.
- support VPN client(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
- support VPN server(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
- support local and remote firmware pgrade,import and export configre file.
- support NTP, RTC embedded.
- support mlitiple DDNS provider service.
- support MAC Address clone, PPPoE Server
- support mlti online trigger ways, inclding SMS, ring and data. support link disconnection when timeot
- support APN/VPDN
- support DHCP server and client, firewall, NAT, DMZ host , RL block, QoS, ttraff,statistics, real time link speed statistics etc.
- Fll protocol support , sch as TCP/IP, DP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP, SSHD, etc.
- Schedle Reboot, Schedle Online and Offline,etc.
Industrial cellular module
Standard and Band
Compliant to GSM phase 2/2+
GPRS class 10, class 12(optional)
Industrial 32bits CPU
8MB(Extendable to 64MB)
1 10/100 Mbps Ethernet port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
1 RS232(or RS485/RS422) port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5(optional), 2
Parity: none, even, odd, (space, mark) (optional)
Baud rate: 2400~115200 bps
"Power", "System", "Online", "Link/ACT", "Alarm", “Signal Strength”
Standard SMA female interface, 50 ohm, lighting protection(optional)
Standard 3V/1.8V user card interface, 15KV ESD protection
Standard 3-PIN power jack, reverse-voltage and overvoltage protection
Restore the router to its original factory default settings
Iron, providing IP30 protection
95% ( unfreezing)