F3824 mini 4g wifi 802.11b/g/n wireless routerwi fi router
F3824 LTE/WCDMA WIFI Router is a kind of cellular terminal device that provides data transmission function by public LTE/WCDMA network.
It adopts highpowered industrial 32bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect devices to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration.
It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
industrial m2m 4g lte router with wifi function
Industrial cellular module
Standard and Band
LTE FDD 2600/2100/1800/900/800MHz, 700/1700/2100MHz(optional)
HSPA+/HSDPA/HSUPA/WCDMA /UMTS900/2100MHz, 800/850/1900/2100MHz(optional)
GPRS CLASS 10
GPRS CLASS 12
HSPA+: 21Mbps(Download speed) 5.76Mbps(Upload speed)
IEEE802.11b/g: 54Mbps (max)
IEEE802.11n: 150Mbps (max)
WEP, WPA, WPA2, etc.
Industrial 32bits CPU
8MB(Extendable to 64MB)
1 10/100 Mbps Ethernet port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
1 RS232(or RS485/RS422) port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Baud rate: 110~230400 bps
"Power", "System", "Online", "Link/ACT", "WIFI", “Signal Strength”
Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional)
WIFI: Standard SMA male interface, 50 ohm, lighting protection(optional)
Standard 3V/1.8V user card interface, 15KV ESD protection
Standard 3-PIN power jack, reverse-voltage and overvoltage protection
Restore the router to its original factory default settings
Iron, providing IP30 protection
95% ( unfreezing)
Design for Industrial Application
High-powered industrial cellular module
High-powered industrial 32bits CPU
Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
Housing: iron, providing IP30 protection.
Power range: DC 5~35V
Stability and Reliability
Support hardware and software WDT
Support auto recovery mechanism, including online detect, auto redial when offline to make router always online
Ethernet port: 1.5KV magnetic isolation protection
RS232/RS485/RS422 port: 15KV ESD protection
SIM/UIM port: 15KV ESD protection
Power port: reverse-voltage and overvoltage protection
Antenna port: lightning protection(optional)
Standard and Convenience
Support standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect to serial, Ethernet and WIFI devices directly
Support intellectual mode, enter into communication state automatically when powered
Provide management software for remote management
Support several work modes
Convenient configuration and maintenance interface(WEB or CLI)
Support 3G/HSPA/4G WAN access methods.
Support VPN client(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
Support VPN server(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
Support local and remote firmware upgrade,import and export configure file.
Support NTP, RTC embedded.
Support mulitiple DDNS provider service.
Support MAC Address clone, PPPoE Server
WIFI support 802.11b/g/n. support AP, client, Adhoc, Repeater, Repeater Bridge and WDS(optional) mode.
WIFI support WEP,WPA,WPA2 encryption,Support RADIUS authentication and MAC address filter.
Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
Support DHCP server and client, firewall, NAT, DMZ host , URL block, QoS, ttraff,statistics, real time link speed statistics etc.
Full protocol support , such as TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP, SSHD, etc.
Schedule Reboot, Schedule Online and Offline,etc.